MX3.2K4(4 CH amp 4 x 800W 4 ohms)Technical Parameters
Test projects | Parameters |
Voltage range | 110V±10%/220V±10% 50-60 Hz |
Max current consumption | 20A/10A |
Soft starting time | 5 second |
Rated output power @ 8 Ohms THD≤1%
1.0 kHz sine wave, 1% THD, 1 channel driven |
4X400W |
Rated output power @ 4 Ohms THD≤1%
1.0 kHz sine wave, 1% THD, 1 channel driven |
4X800W |
Frequency Response 20 Hz – 20 kHz
(8 Ω load, 1 dB below rated power) |
± 0.5 dB |
THD
1KHz, 8 Ω load, 3dB below rated power |
≤0.05% |
IMD 8Ω load 1KHz, 8 Ω load, 3 below rated power 60Hz+7KHz |
≤0.05% |
Slew rate | 30V / us |
Damping factor | >300 |
SNR | >105dB |
Channel separation @ 1KHz | >60dB |
Input range | ≤+20dBu |
Dynamic limit(clipping detection) | Full-automatic |
Input impedance | 10 kOhms + 10 KOhms ( +/- 1% ) |
Input common-mode rejection ratio @ 1KHz | >70dB |
Protection | short circuit, overload, low-impedance,
direct current, overheating |
Cooling mode | Air draft stepless speed |